*Best Gas Masks*
Most people associate gas masks with the military and images of soldiers, but the fact is that gas masks have many more uses. Gas masks in war are used to prevent a soldier from breathing in toxic gases, and modern gas masks are used for much the same thing.
What Are Gas Masks Used for?
The simple fact is that gas masks are worn to prevent a person from breathing in either toxic substances, such as gases, or other pollutants that may cause harm. For example, gas masks may be used to prevent the following from being inhaled:
- Paint fumes
- Toxic gases, such as chlorine or industrial chemicals
- Mold spores
It is mandatory, for example, for people who work with and remove asbestos to wear high-grade gas masks. Such masks will typically cover the eyes, nose, and mouth to prevent the asbestos fibers from being inhaled or entering the soft tissues.
Side Note – Check out this article on Raving Trends
What Should You Look for in a Gas Mask?
If you’re looking for the best gas masks, you need to know what to look for. What qualities should you be considering when you’re in the market for one of these specialty items? Consider the following:
You don’t necessarily go out and buy a gas mask for comfort, but if you’re going to be wearing it for a job for hours at a time, you need it to be comfortable. Many masks use a soft rubber or silicone surround so that they are more comfortable on and around the face.
2. NIOSH approval
The National Institute for Occupational Safety and Health (NIOSH) regulates products such as gas masks and needs to ensure that they are fit for purpose. A gas mask with NIOSH approval has been deemed to be effective and safe. You should never consider buying a gas mask unless it has the NIOSH stamp of approval.
The fact is that not all gas masks are made equally. In fact, some are not rated to prevent certain agents from entering the respirator. When looking for a gas mask, you need it to be 100% effective for the task you need it for. For example, if you’re going to be working with industrial chemicals that give off toxic gases, you must ensure that the gas mask can prevent these chemical agents from entering.
Finally, how strong and durable is the gas mask? Is the visor scratch resistant? Will the mask hold up to repeated handling and use? The last thing you want to be wearing is a mask that is not completely sealed because it cannot handle being tossed around. Additionally, a durable and strong mask is going to be a lifesaver in an emergency situation.
What Gas Masks Are the Best?
Whether you are at home and are involved in a project where toxic fumes may be a problem, or you need one for work, here are the best gas masks for 2019.
1. Avon M50 (https://www.amazon.com/dp/B07HMD13MT?psc=1)
This is one impressive looking gas mask. An all-black and classic military design with a modern flavor, it will effectively defend against all biological and chemical agents. In this sense, it can be used for dangerous tasks around the home or elsewhere.
The M50 is a military grade gas mask. It also has a military look which may not be for everyone. That said, this is one serious piece of protective equipment and will cover the eyes, the nose, the mouth, and all soft tissues on the face.
The M50 also features a full polyurethane visor. This is important because it is effectively scratch resistant, making this one durable and tough gas mask. It even features a drinking tube.
Overall, the Avon M50 is going to set you back some serious money, but it doesn’t really get much better than this. It’s tough, durable, flexible, and will protect again both chemical and biological agents. In this sense, it may also appeal to the survivalist community.
2. MSA Millennium CBRN (https://www.amazon.com/dp/B00197Z1R0?psc=1)
This MSA gas mask is one amazing unit. It is completely CBRN compliant, meaning that it will prevent chemical, radioactive, and biological agents from entering. In fact, it was used by the US Air Force at one point, so you know that this will be a tough and professional unit.
What you need to know is that this was designed for professionals in emergency fields such as firefighters, military personnel, police, and so on. It needs to be able to withstand a lot of rough handling and be able to prevent the inhalation of toxic gases and other pollutants.
Like many quality gas masks, the visor is constructed of tough and durable polyurethane material. The harness is also easy to use and provides comfort and support. The soft rubber also makes this one of the more comfortable masks to wear.
IT may not be the least expensive option, but this is going to serve anyone well in just about any situation, whether that’s dealing with a fire hazard or chlorine gas.
3. SAS Safety 7650-61 (https://www.amazon.com/dp/B000F0879Q?psc=1)
This NIOSH approved gas mask from SAS is one good looking product. It is bulky without being too heavy and also features a silicone skirt for extra comfort around the face when wearing it.
Additionally, this mask offers a great deal of viewing clarity. If you’re working, you need to be able to see exactly what you’re doing and have as wide a field of view as possible. This SAS mask offers a very clear view.
To top all of this off, the anti-scratch coating on the poly-carbonate lens is tough and durable and will certainly withstand repeated use.
Overall, this is an ideal gas mask for use in industrial and factory environments where clarity of vision and a wide field of view is of utmost importance.
4. Mestel SGE 400/3 (https://www.amazon.com/dp/B07FP877Z4?psc=1)
The Mestel SGE is ideal for anyone working with hazardous chemicals and other materials day in and day out. It features a one-piece visor that is not only scratch resistant, but also provides excellent visibility to the wearer, as well as a good field of view. This makes it ideal in circumstances where dangerous work is being done and a good view of everything is absolutely essential.
One other feature to note is that the entire visor is set back in this mask, which makes it less bulky, but also means that any third party optical equipment can easily be attached to it without adding too much extra bulk.
In terms of comfort, the facial seal is made from a soft rubber that is structured like a bellows. This construction means that the rubber seal will easily move in and out and accommodate any facial type. Greater levels of comfort when being worn make this an ideal gas mask for any factory or industrial work.
If you want maximum protection and strength, Mestel has designed this unit with a complete polycarbonate body. This material is extremely strong and can resist repeated blows, if you happen to be in that situation.
The price is not inexpensive, but what you get is one of the best gas masks on the market today without any doubt at all. If you want the best in safety and effectiveness, many people think that the Mestel is a very good choice indeed.
5. 3M Safety 7800S-L 7800S Series Silicone Full Facepiece Respiratory Protection (https://www.amazon.com/dp/B00E0O77NA?psc=1)
You may be familiar with 3M because of their many office products, but they also make respirators and gas masks. This mask is certainly not the least expensive, but what do you get for your investment?
The good news is that this mask is NIOSH approved. It is also not as bulky or as heavy as some, which makes it ideal for certain tasks. The facial surround is made of a nice soft silicone material which makes it quite comfortable to wear, and the strap harness is completely adjustable for extra comfort.
It may not be the most attractive gas mask around, but the nose cup means that the visor won’t be fogging up during use. Not every gas mask features such a nose cup, so this is a welcome addition. There is also a diaphragm built into the mask that allows for easy communication with others.
6. MIRA SAFETY Full Facepiece Reusable Respirator (https://www.amazon.com/dp/B07L381PC1?psc=1)
This great looking gas mask can prevent all kinds of chemicals, biological agents, and pollutants from being inhaled. MIRA has even included a five-year warranty with this gas mask, so this makes it an excellent long-term investment for daily and even weekly use.
The other thing to note is that the visor permits a truly wide viewing angle, which is ideal for those tasks where high visibility of the periphery is required. This makes it an excellent choice for work onsite, in the field, or in an industrial setting where chemicals need to be handled carefully.
This is a gas mask that has been expressly designed for both industrial work and also for military use and emergency services. This may put some people off, but the fact is that a gas mask should be able to save your life in an emergency, whether that is handling dangerous chemicals in a factory or dealing with tear gas in a riot.
This mask also has a hydration system built in, so it can be worn during emergency situations and provide water for the user when they need it most. This is especially vital in situations where a user is being accosted or is in the middle of a riot or similar emergency where continued hydration is crucial to the health and safety of the wearer.
7. Yinshome Respirator Mask (https://www.amazon.com/Respirator-Cartridges-Breathing-Protection-Chemicals-Paint/dp/B07MWY3D84)
The truth is that not every gas mask has to be of military grade quality. Of course, there are times when this is going to be required, but sometimes a person just needs a good gas mask that is effective at preventing the inhalation of paint fumes, for example. That’s where this inexpensive gas mask from Yinshome comes in handy.
This mask has been expressly designed for the DIY enthusiast at home who needs an inexpensive option for protection against many types of toxic fumes, including fumes from enamel paint and turpentine. This also makes it ideal for jobs such as paint stripping, automotive spraying, and so on.
The fact is that this is not going to withstand a riot or repeated blows. It is not made of tough polycarbonate. But it does feature an anti-fogging valve and a very wide and clear field of view through the visor. Yinshome has also seen fit to include a full five-year warranty.
For when you don’t need military grade, but just need a lightweight mask that will prevent carbon dioxide, chlorine, paint fumes, and other gases from affecting you, this is an excellent low priced option.
Gas masks comes in all shapes and sizes, but it’s essential to invest in one that suits your needs. If you just have a job at home to get done and you don’t want to breathe in turpentine fumes, the Yinshome would make an excellent choice.
On the other hand, there are many gas masks available that are NIOSH approved and feature protection against chemical, biological, and radioactive agents. This may seem like overkill, but many people in emergency services and even in industrial sectors need this kind of protection every day.
When looking for the right gas mask, just remember the following criteria:
- Choose one that is a comfortable fit for your face and head if you plan to wear it for extended periods of time
- Choose one that is at least NIOSH approved or certified
- Ensure that the gas mask is effective at filtering out the gases and pollutants that you’ll be working with
- Ensure that the gas mask is durable enough for the working scenario you’ll be in, whether at home or at work